This site is out-of-date. You should be redirected to our new site shortly, to go there now Click Here

Rutland
Wind / Solar Pump
Kit

We have developed probably one the simplest and most efficient wind-pumping systems available. The kit is based on our established Rutland 913 Windcharger that is connected to an electric pump via an interface controller, no battery is required. The controller also accepts power input from solar panels so that a hybrid system may be operated to take full advantage of available power day and night.

Marlec913.bmp (130054 bytes)


Rutland 500

Rutland Furlmatic 1803

Rutland Wind / Solar Pump
Kit

Index   

 

The Rutland Wind Pump Kit is designed for pumping water to a depth of 70m at isolated locations in all climates and overcomes many of the problems associated with traditional wind pumps that often need a strong wind to overcome mechanical torque and shut down in relatively low wind speeds.

The Rutland Wind-Electric Pump Kit can be employed to provide potable water for isolated communities, drainage, livestock watering and irrigation on farms.

  • "Smart" interface controller maximises flow rates over all wind conditions.

  • 24 Hour operation potential gives high average daily flow rates

  • Standard 20m borehole depth kit, others to order

  • LED indicator for pump status

  • Cost effective

  • No specialised knowledge required for installation and operation, only basic tools required

  • Portable

  • Reservoir float switch included to preserve pump life (switches pump off when tank is full)

  • Accepts further input of up to 100w of solar panels · Windcharger is not sited directly above borehole/well allowing easy re-siting of the shaft

  • Silent and clean in operation

  • Built-in safety features

  • Long life, durable and reliable components

The complete kit consists of:

  • Rutland 913 Windcharger (see specification previous pages)

  • Electric submersible pump

  • Weather proof interface controller and brackets for pole or wall mounting

  • Float switch kit

  • Portable water hose 30m and electrical cable 50m

  • Support rope of 25m, cable ties, fixings etc

End.    Back to