This site is out-of-date. You should be redirected to our new site shortly, to go there now Click Here
Charge controllers to prevent
overcharge of batteries
THE AUTOMATIC
SEQUENCING CHARGER™ (ASC™)
The ASC™ is a solid-state charge
controller for use in PV systems with currents up to 16 amps. It is available in 6, 12,
and 24 volt models. Options include low-voltage load-disconnect, battery temperature
compensation, and user adjustable setpoints.
ASC 12 volt 8 amp £49.00
ASC 12 volt 12 amp £59.00
ASC 12 volt 16 amp £79.00
Call for pricing on options. |
 |
General  Specifications:
- Completely encapsulated
- Optional external temp. comp.
- Optional Load Disconnect
- Available in 1.5, 4, 8, 12, and 16 amp versions
- Available in 6 volt, 12 volt and 24 volt
- Available with optional 10 amp low-voltage load-disconnect
|
|
THE ASC-PLUS™
The ASC-PLUS™ is a solid-state
charge controller for use in PV systems with currents up to 15 amps. It is available in 12
and 24 volt models. Features include low-voltage load-disconnect, a waterproof battery
fuse, and a linear LED display indicating battery status.
|
|
General Specifications:
- Completely encapsulated
-
Optional external temp. comp.
- Available for 15 amps
- Available 12 volt or 24 volt
- Includes low-voltage load-disconnect and linear battery
status LEDs
|
|
THE MARK/15™
REGULATOR/MONITOR (formerly the SC3/15™) The MARK/15™ is a solid-state
charge controller for use in PV systems with currents up to 15 amps. It is available in 12
volt and 24 volt versions. It includes a full-featured LCD meter to display battery
voltage, array current and charge set-point. It is intended to flush-mount within a wall
for a very distinctive appearance. Options include low-voltage load-disconnect and battery
temperature compensation.
SCI Mark III Digital
Controller £89.00 |
|
General Specifications:
- Fuse protection on both battery and array
- Easy-to-use LCD display
- Bargraph battery condition indicator
- Controls up to 16 amps of array current
- Available in 12 volt or 24 volt
- Optional 10 amp low-voltage load-disconnect
|
Key Benefits
![[Bullet]](clip_image014.gif)
Using the correct charge
controller extends battery life.
Prevents backfeed at night
or cloudy conditions.
Meters available on some
units for system performance and battery condition.
Solar Boost
2000 "New Products"
Increases charger current up
to 30% or more
using peak power tracking
Key
Benefits
20
amp charge controller with max. power point tracking
Pulse
width modulation charge controller maintains a more fully charged battery bank
Fully
automatic electronic current limit prevents overload and allows use of full rated current
Charge
current increase can save money by requiring fewer PV panels
Selectable
charge voltage charges flooded or gel type 12 volt lead acid batteries
Optional
temperature compensation probe or flush mount enclosure box available £25 each
Full
36 month limited warranty
Description |
Part Number |
Specifications |
Price |
Solar Boost 2000 |
SB2000 |
12 volt, MPPT 20 amp controller |
£225 |
SB Mount Box |
720-0011 |
wall mount box for SB2000 only |
£28 |
Battery Temp. Sensor |
930002220 |
temperature sensor for SB2000 or SB50 |
£28 |
|
Solar
Boost™ 50
50 Amp Peak Power Tracking Photovoltaic
Charge Controller |
|
Solar Boost™ 50 shown with
optional digital display |
Looking
for the best in
photovoltaic charge control?
Get improved
performance from
your PV panels and batteries with
SOLAR BOOST™ 50 |
|
|
|
|
Description |
Part Number |
Specifications |
Price |
Solar Boost 50 |
SB50 |
12/24 volt, MPPT 50 amp controller |
£369 |
Solar Boost 50 w/ digital display |
SB50D |
same as above with digital display |
£449 |
Battery Temp. Sensor |
930002220 |
temperature sensor for SB2000 or SB50 |
£28 |
Solar Boost 50 front panel display |
SB50PD |
add meter to SB50 to make a SB50D |
£99 |
Solar Boost 50 Remote display |
SB50RD25 |
Remote display with 25' cable, duplex box mount |
£99 |
The
Ultimate Photovoltaic Charge Controller Increases Charge Current Up To 30% Or More!
Solar Boost
50 is a 12/24V photovoltaic (PV) charge controller capable of delivering up to 50 amps of
output current. Patent pending maximum power point tracking (MPPT) technology
allows Solar Boost 50 to extract more power from the PV array, resulting in a charge
current increase of up to 30% or more. Other charge controllers without this technology
simply can't deliver the charge current provided by Solar Boost 50. Don't waste your money
by throwing PV power away! Get the PV power you paid for with Solar Boost 50.
Solar Boost
50 does much more than increase charge current. It offers an advanced fully automatic
three stage charge control system to ensure the battery is properly and fully charged,
resulting in enhanced battery performance with less battery maintenance. Reliable high
efficiency power conversion is achieved using the latest generation power MOSFET
transistors, with output power delivered via a series pass Pulse Width Modulation
(PWM) control scheme. An electronic current limit feature prevents output current from
exceeding 50 amps. Output current limit eliminates worry about overload or nuisance fuse
blow when PV output is unexpectedly high. An equalize function is also included to
periodically condition liquid electrolyte lead-acid batteries.
An optional
user friendly digital display is available to monitor PV charge performance. The display
shows battery voltage, solar current, charge current, charge mode and state of charge. It
can be provided in the controller, as a remote panel installed up to 300' away, or both.
Optional temperature compensation of charge voltage is also available to further improve
charge control and battery performance. Selectable compensation curves support lead-acid
and NiCd battery chemistries.
|
Solar Boost™ 50
50 Amp Peak Power Tracking Photovoltaic
Charge Controller
|
Patent
Pending Technology Tracks PV Peak Power Operating Point, Increasing Charge Current up to
30% Or More!
 |
|
Charge
Current Increase Can Save Money By Requiring Fewer PV Panels And Simplifying PV Panel
Installation
 |
|
Configurable
Multistage Charge Control Optimises Charge Parameters To Battery Size, Type And
Temperature
 |
|
Accommodates
External Battery Shunt Providing Optimal Charge Control And Enhanced Battery Performance
 |
|
Available
Temperature Compensation Further Improves Charge Performance And Battery Life
 |
|
50
Amp 12/24 Volt Rating Supports Large PV Arrays
 |
|
Electronic
Current Limit Prevents Overload Or Nuisance Fuse Blow
 |
|
Available
Digital Display Monitors PV Charge Performance
 |
|
Full
36 Month Limited Warranty |
|
|
Trace C40
and Optional Meter Remotes
C40
40 amp 12, 24 or 48 vdc, 3-stage solid-state solar charge control OR DC load
controller OR diversion controller with status LED, electronic overcurrent protection,
manual equalisation mode and adjustable setpoints.
|
|
Key Benefits
40 amp charge controller or load controller
Pulse width modulation charge controller maintains a more fully charged
battery bank
Automatic or manual equalization
Field adjustable for 12, 24 or 48 volts
Field adjustable for Float, Bulk or LVD settings.
Optional temperature compensation probe
Optional Remotes available in face plate, 50 or 100ft lengths.
C40 £189
C40DVM digital volt meter face plate £79
C60 £225
60 amp 12 or 24 volt DC, 3-stage solid-state solar charge control OR load controller
OR diversion
controller with status LED, electronic overcurrent protection, manual equalisation mode
and adjustable setpoints.
C35 £149
35 amp 12, 24 or 48 vdc, 3-stage solid-state solar charge control OR load controller
OR diversion controller with status LED, electronic overcurrent protection, manual
equalisation mode and adjustable setpoints.
C30A £110
30 amp, 12 or 24 vdc relay type solar charge controller with adjustable setpoints and
nightime shut off.
C12 £110
12 amp, 12 vdc, 3-stage solid-state solar charge control and DC load
control with nightlight mode, status LED, low battery disconnect,
electronic overcurrent protection and adjustable setpoints,
![[Banner Image]](clip_image038.gif)
Charge controllers to prevent the overcharging of
batteries
Model |
Type |
RATING |
VOLTAGE |
Price
Inc VAT |
SOLARIX
MICRO |
no longer available |
4
AMPS |
12V |
|
SOLSUM |
CHARGE
CONTROLLER |
6
A SOLAR |
12V |
£31.27 |
SOLSUM |
CHARGE
CONTROLLER |
8
A SOLAR |
12V |
£39.96 |
SOLARIX
ALPHA |
CONTROLLER |
8
AMPS |
12V/24V |
£44.01 |
SOLARIX
ZETA |
CONTROLLER
+ LCD |
8
AMPS |
12V/24V |
£72.40 |
SOLARIX
GAMMA |
CONTROLLER |
12
AMPS |
12V/24V |
£54.44 |
SOLARIX
JOTA |
CONTROLLER
+ LCD |
12
AMPS |
12V/24V |
£80.51 |
SOLARIX
SIGMA |
CONTROLLER
+ LCD |
20
AMPS |
12V/24V |
£94.41 |
SOLARIX
THETA |
CONTROLLER
+ LCD |
30
AMPS |
12V/24V |
£112.95 |
The Solsum range have auto disconnect when battery is fully charged, LCD shows basic
battery condition as red, amber and green read-outs.
home
